The recent hot weather, a lot of friends for your CPU replaced radiator. In replacing the radiator, however, if the thermal conductivity of silicone daub is improper, it is easy to lead to serious decline of CPU heat dissipation performance may have missed before. The following author according to their own personal experiment, summarizes some practical tips, hope to be of help.

1, first of all, with soft tissue or flannelette (such as a camera lens cloth) clean the CPU core surface and the bottom of the radiator, be careful not to let the fingers touch the core and surface of the radiator.

2, determine the area of contact with the CPU fin in the center of the area at the bottom of the radiator on a certain amount of thermal conductive silicone.

3, finger set into the plastic bags, then press, daub radiator fingers back and forth at the bottom of the thermal conductive silicone, until the silicon grease evenly distributed in the contact area of the CPU. You can through the clockwise and counterclockwise movement, ensure the silicone filled the radiator at the bottom of the aperture and the uneven places. Note: do not directly use fingers!

4, at the bottom of the radiator with no flannelette thermal conductive silicone rub out, then you can see at the bottom of the radiator color silicone places and other areas, the silicon grease has filled the gap of the base.

5, with clean tools (such as razor blades or clean the knife to stir up a few thermal conductive silicone, and placed in a corner of the CPU core (such as the place like the lower left corner). Note that just a small piece.

6, using the tools of razor blades or other clean, starting from the corner of the CPU core, the silicon grease evenly over the entire core. For ordinary radiator bottom, the thickness of the silicon grease is about the thickness of a piece of ordinary paper.

, confirm the radiator base and CPU core surface no foreign body, put the radiator on the CPU, the only light pressure, can't rotational or translational radiator, otherwise it may lead to the radiator between the CPU and uneven thickness of the silicon grease.