HC138 series thermal conductive paste, thermal conductivity silicone grease

Heat transfer coefficient: > adaptation range: 4.0-55 c - 210 c

Main features: high conductivity thermal conductive silicone, wide application.

Description: the product can provide excellent thermal performance, suitable for electronic components have higher request for heat conduction. This series of products are all passed SGS international environmental certification, comply with the eu ROHS testing standards.

Main application: this product is widely used for sensitive electronic components of the heat conduction, such as high power tube, silicon controlled rectifier, inverter modules and other cooling devices. This product in the sensitive electronic components with good heat conduction channel formed between heat dissipation base material, the lower the device working temperature below the critical point, greatly extend the life of the components.

Safety instructions

This product is tasteless, odorless, non-toxic, has a good physiological inertia, no stimulation to the skin and damage; This product does not contain flammable ingredients, no special requirements for transport

Typical application:

Surface of temperature controller and assembly

Between semiconductor and heat sink

Induction cooker manufacturers

Sensor manufacturers

Water heater manufacturer

The thermoelectric cooling device

The LED manufacturers

Shelf life: 24 months

Packing details: bottled: 20-40 kg, canned: 500 grams, 1000 grams; Cylinder loading: 0.5 g - 50 g; Bags: 0.5 to 2 g

Note:

1. Try to put in the shade, avoid sun exposure;

2. Cover immediately after use. Avoid contact with dust and other sundry.

3. The thermal conductivity of silicone daub thickness under the condition of the full coverage, the thinner the better (about the thickness of the A4 printing paper).