|
 Products |
 |
|
|
|
| Search Products |
|
|
|
|
|
Products
|
|
|
 |
|
| Anti-Shock Microphone Stand-SS106S |
| Description ： |
SS106S anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces.
Ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors. |
|
|
|
| Characteristics： |
|
- Effectively isolate mounted microphone from impact vibration
- They are intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces
- Quick-mount type microphone using industrial standard XLRM 3-pin type connectors
- A press-on/ press-off switch that controls the microphone,
- Muting it by 55 dB at 1, 000 Hz. The circuitry also operates a light in the switch,
- Powered by the 24-48V phantom source, to indicate when the mic is “on”.
|
|
 |
| Technology parameters： |
|
Phantom Power Requirements 24-48V DC, 3 mA typical
Output Impedance 360 ohms
Insertion Loss 1 dB (150 ohm source, 100k ohm load)
Mute Attenuation 55 dB at 1000Hz 35 dB at 100Hz 30 dB at 50Hz (150 ohm source, 100k ohm load)
Mic Attachment XLRF - type, XLRM - type, Switch with LED
Dimensions 112mm X 142mm X 40mm (Width X Depth X Height)
Weight 1.2 kg |
|
|
| System connection diagram
： |
 |
|
| Back |
|
|
|
|
