Fast Ethernet Fiber Media Converter

Technical specifications

1) Operating standards: IEEE802.3u,IEEE802.3z/ab. 10/100Base-TX,100Base-FX,1000Base-T/SX/LX

2) MAC addresses table : 1k

3) Data buffer: Built-in 128Kb RAM

4) UTP Connector: RJ-45,10/100/1000Mbps, Fiber connector: ST/SC/FC,1000Mbps

5) Cable: UTP: Cat.5 (the max distance up to 100m)

    Multimode Fiber: 50/125, 62.5/125um ( 2km or 5km)

    Singlemode Fiber: 8/125, 8.7/125, 9/125, 10/125um (20-120km)

6) Flow Control: Full duplex: Supporting standard IEEE802.3x

     Half Duplex: back pressure

7) LED: Power, FX SD, FX Link/Act, TX FDX, TX Link/Act

8) Power Requirement: AC 100~240V, 50-60Hz, DC 5V, 1A

9) Ambient temperature: 0~50°C; Storage temperature: -20°C~70°C

10) Relative humidity: 5~90%

11) dimensions: Internal power:30×110×40mm; External power: 26×70×95mm

LED indicator lamp	Status	Explanation
FX Link/Act	On	Connection status display for fiber link.
		"ON" indicates that Fiber link is in correct connection
	Blink	Active status display of fiber link
		"Blink" indicates packet goes through Fx end.
TX Link/Act	On	Connection status display for electric link.
		"ON" indicates that electric link is in correct connection
	Blink	Active status display of fiber link
		"Blink" indicates packet goes through Tx end.
FDX	On	Transceiver works in the full duplex mode.
	Off	Transceiver works in the half duplex mode.
PWR	On	Power is on and normal.
FX	On	Transfer rate of optical interface is 100Mbps.
TX	On	Transfer rate of electric interface is 100Mbps.
	Off	Rate of electric interface is 10Mbps